;Z80 depacker for megalz V4 packed files (C) fyrex^mhm
; DESCRIPTION:
;
; Depacker is fully relocatable, not self-modifying,
;it's length is 110 bytes starting from DEC40.
;Register usage: AF,AF',BC,DE,HL. Must be CALL'ed, return is done by RET.
;Provide extra stack location for store 2 bytes (1 word). Depacker does not
;disable or enable interrupts, as well as could be interrupted at any time
;(no f*cking wicked stack usage :).
; USAGE:
;
; - put depacker anywhere you want,
; - put starting address of packed block in HL,
; - put location where you want data to be depacked in DE,
; (much like LDIR command, but without BC)
; - make CALL to depacker (DEC40).
; - enjoy! ;)
; PRECAUTIONS:
;
; Be very careful if packed and depacked blocks coincide somewhere in memory.
;Here are some advices:
;
; 1. put packed block to the highest addresses possible.
; Best if last byte of packed block has address #FFFF.
;
; 2. Leave some gap between ends of packed and depacked block.
; For example, last byte of depacked block at #FF00,
; last byte of packed block at #FFFF.
;
; 3. Place nonpackable data to the end of block.
;
; 4. Always check whether depacking occurs OK and neither corrupts depacked data
; nor hangs computer.
;
DEC40
LD A,#80
EX AF,AF'
MS LDI
M0 LD BC,#2FF
M1 EX AF,AF'
M1X ADD A,A
JR NZ,M2
LD A,(HL)
INC HL
RLA
M2 RL C
JR NC,M1X
EX AF,AF'
DJNZ X2
LD A,2
SRA C
JR C,N1
INC A
INC C
JR Z,N2
LD BC,#33F
JR M1
X2 DJNZ X3
SRL C
JR C,MS
INC B
JR M1
X6
ADD A,C
N2
LD BC,#4FF
JR M1
N1
INC C
JR NZ,M4
EX AF,AF'
INC B
N5 RR C
RET C
RL B
ADD A,A
JR NZ,N6
LD A,(HL)
INC HL
RLA
N6 JR NC,N5
EX AF,AF'
ADD A,B
LD B,6
JR M1
X3
DJNZ X4
LD A,1
JR M3
X4 DJNZ X5
INC C
JR NZ,M4
LD BC,#51F
JR M1
X5
DJNZ X6
LD B,C
M4 LD C,(HL)
INC HL
M3 DEC B
PUSH HL
LD L,C
LD H,B
ADD HL,DE
LD C,A
LD B,0
LDIR
POP HL
JR M0
END_DEC40