; This driver works with 16c550 uart that's support AFE
module Uart
; Make init shorter and readable:-)
macro outp port, value
ld b, port
ld c, #EF
ld a, value
out (c), a
endm
; Internal port constants
RBR_THR = #F8
IER = RBR_THR + 1
IIR_FCR = RBR_THR + 2
LCR = RBR_THR + 3
MCR = RBR_THR + 4
LSR = RBR_THR + 5
MSR = RBR_THR + 6
SR = RBR_THR + 7
init:
outp MCR, #0d // Assert RTS
outp IIR_FCR, #87 // Enable fifo 8 level, and clear it
outp LCR, #83 // 8n1, DLAB=1
outp RBR_THR, #01 // 115200 (divider 1)
outp IER, #00 // (divider 0). Divider is 16 bit, so we get (#0002 divider)
outp LCR, #03 // 8n1, DLAB=0
outp IER, #00 // Disable int
outp MCR, #2f // Enable AFE
ret
retry_rec_count_max equ 50 ;ждать 1 байт максимум столько прерываний
; Flag C <- Data available
; isAvailable:
; ld a, LSR
; in a, (#EF)
; rrca
; ret
; Non-blocking read
; Flag C <- is byte was readen
; A <- byte
; read1:
; ld a, LSR
; in a, (#EF)
; rrca
; ret nc
; ld a, RBR_THR
; in a, (#EF)
; scf
; ret
; Tries read byte with timeout
; Flag C <- is byte read
; A <- byte
read:
xor a ;4
ld (#5C78),a ;обнулить счётчик ожидания ;13
.wait
ld a, LSR
in a, (#EF)
rrca
jr nc, .readW
ld a, RBR_THR
in a, (#EF)
ret
.readW
ld a,(#5C78)
cp retry_rec_count_max
jr c, .wait ;ещё попытка
xor a ;выключим флаг переноса если время вышло
ret
; Blocking read
; A <- Byte
; readB:
; ld a, LSR
; in a, (#EF)
; rrca
; jr nc, readB
; ld a, RBR_THR
; in a, (#EF)
; ret
; A -> byte to send
write:
push af
.wait
ld a, LSR
in a, (#EF)
and #20
jr z, .wait
pop af
ld b, RBR_THR
ld c, #EF
out (c), a
ret
endmodule