Blame |
Last modification |
View Log
| Download
| RSS feed
two_ops: ;2OP: 0 1 2 3 4 5 6 7
defw zbreak, z_je, z_jl, z_jg, z_dck, z_ick, z_jin, testv
defw z_or, z_and, z_ta, z_sa, z_ca, store, insobj, z_ldw
defw z_ldb, z_gp, z_gpa, z_gnp, z_add, z_sub, z_mul, z_div
defw z_mod, call2s, call2n, z_scol, throw, fail, fail, fail
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;According to the Z-Machine Standards Document, 2OP:0 is possibly a debug
;breakpoint. So let it call ZXILIV, which is the nearest thing to a
;debug breakpoint currently in ZXZVM.
;
zbreak:
ld hl,(zpc) ;<< v1.01 call breakpoint with
ld de,(zpc+2) ;>> EHL = program counter
call ZXILIV
scf
ret
;
z_jg: ld hl,(v_arg2)
ld de,(v_arg1)
call cpsign
jr c,branch
jp nbranch
;
z_jl: ld hl,(v_arg1)
ld de,(v_arg2)
call cpsign
jr c,branch
jp nbranch
z_je: ld bc,(v_arg1)
ld hl,v_arg2
ld a,(v_argc)
cplp: dec a
jp z,nbranch
push af
ld e,(hl)
inc hl
ld d,(hl) ;DE = argument to compare with
inc hl
inc hl
inc hl
call cpdebc
jr z,branch1
pop af
jr cplp
branch1:
pop af
branch: call zpcipeek ;Branch argument, byte 1
bit 7,a
jr z,rnbrnch ;Meaning reversed?
rbranch:
res 7,a
bit 6,a ;Far branch?
jr z,br_far
res 6,a
;
;Near branch, offset in A
;
br_near:
or a
jp z,rfalse
cp 1
jp z,rtrue
ld e,a
ld d,0
jr do_brnch
;
;Far branch, get offset into HL.
;
br_far: ld h,a
call zpcipeek
ld l,a ;HL = offset
bit 5,h ;Negative?
jr z,pbranch
ld a,h
or 0e0h ;Extend 14-bit signed int to 16 bits.
ld h,a
pbranch:
ld a,h ;IF H is 0 (ie, offset fits in 8 bits)
or a ;then check for rtrue / rfalse
ld a,l
jr z,br_near
ex de,hl
do_brnch:
dec de
dec de
ld hl,(zpc)
ld bc,(zpc+2)
bit 7,d ;IF backjumping, different code because
jr nz,backjmp ;the high word of PC rolls over differently
add hl,de
jr nc,dbrnc1
inc bc
jr dbrnc1
;
backjmp:
add hl,de
jr c,dbrnc1
dec bc
dbrnc1: ld (zpc),hl
ld (zpc+2),bc
scf
ret
;
nbranch: call zpcipeek ;Branch argument, byte 1
bit 7,a
jr z,rbranch ;Meaning reversed?
rnbrnch:
bit 6,a
scf
ret nz ;IF only one byte, skip it.
jp zpcipeek ;Skip 2nd byte
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;Arithmetic & logic operations
;
z_and: ld hl,(v_arg1)
ld de,(v_arg2)
ld a,h
and d
ld h,a
ld a,l
and e
ld l,a
scf
jp ret_hl
;
z_or: ld hl,(v_arg1)
ld de,(v_arg2)
ld a,h
or d
ld h,a
ld a,l
or e
ld l,a
scf
jp ret_hl
;
testv: ld hl,(v_arg1)
ld de,(v_arg2)
ld a,d
and h
cp d
jp nz,nbranch
ld a,e
and l
cp e
jp nz,nbranch
jp branch
;
z_add: ld hl,(v_arg1)
ld de,(v_arg2)
add hl,de
scf
jp ret_hl
;
z_sub: ld hl,(v_arg1)
ld de,(v_arg2)
and a
sbc hl,de
scf
jp ret_hl
;
z_mul: ld de,(v_arg1)
ld bc,(v_arg2)
call mult16
ex de,hl
scf
jp ret_hl
;
z_div: ld bc,(v_arg1)
ld de,(v_arg2)
call sdiv16
jp nc,div0
ld h,b
ld l,c
jp ret_hl
;
z_mod: ld bc,(v_arg1)
ld de,(v_arg2)
call smod16
jp nc,div0
jp ret_hl
;
z_dck: ld a,(v_arg1) ;Variable number
push af
call get_var ;value into HL
pop af
dec hl ;Decrement
push hl
call put_var ;Write back
pop hl
ld de,(v_arg2) ;Limit
call cpsign ;Now under limit?
jp c,branch
jp nbranch
;
z_ick: ld a,(v_arg1) ;Variable number
push af
call get_var ;value into HL
pop af
inc hl ;Decrement
push hl
call put_var ;Write back
pop de
ld hl,(v_arg2) ;Limit
call cpsign ;Limit now < value?
jp c,branch
jp nbranch
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;get_property; get_property_addr; get_next_property
;
z_gp: ld de,(v_arg1) ;Get property - object DE property BC
ld a,d ;<< v1.01 Object 0 error avoidance
or e
jr z,pret0 ;>> v1.01
ld bc,(v_arg2)
call gprop
scf
jp ret_hl
;
z_gpa: ld de,(v_arg1) ;Get property addr - object DE
ld a,d ;<< v1.01 Object 0 error avoidance
or e
jr z,pret0 ;>> v1.01
ld bc,(v_arg2) ; property BC
call gpaddr
scf
jp ret_hl
;
z_gnp: ld de,(v_arg1)
ld a,d ;<< v1.01 Object 0 error avoidance
or e ;<< v1.04 This incorrectly returned 0
;>> v1.04 for objects 0-255
jr z,pret0 ;>> v1.01
ld bc,(v_arg2)
call gnprop
scf
jp ret_hl
;
;<< v1.01 Results for Object 0
;
pret0: ld hl,0
scf
jp ret_hl
;
;>> v1.01
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;Setting, clearing and testing attributes
;
z_ta: ld de,(v_arg1)
ld a,d ;<< v1.01 Eliminate Object 0 error
or e
jp z,nbranch ;>> v1.01
ld bc,(v_arg2)
call attradd
call peek64
and b
jp nz,branch
jp nbranch
;
z_sa: ld de,(v_arg1)
ld a,d ;<< v1.01 Eliminate Object 0 error
or e
scf
ret z ;>> v1.01
ld bc,(v_arg2)
call attradd
call peek64
or b
call ZXPOKE
scf
ret
;
z_ca: ld de,(v_arg1)
ld a,d ;<< v1.01 Eliminate Object 0 error
or e
scf
ret z ;>> v1.01
ld bc,(v_arg2)
call attradd
ld a,b
cpl
ld b,a
call peek64
and b
call ZXPOKE
scf
ret
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;JIN
;
z_jin: ld de,(v_arg1)
ld a,d ;<< v1.01
or e ;Avoid Zero Error; if 1st operand
jp z,nbranch ;is 0, don't branch. >>
call objadd ;HL->object
ld a,(zver)
cp 4
jr c,v3jin
ld de,6
add hl,de
ld e,0
call ZXPKWI
ld e,c
ld d,b ;DE = parent
ld hl,(v_arg2)
call cpusgn ;Unsigned compare DE,HL
jp z,branch
jp nz,nbranch
;
v3jin: ld de,4
add hl,de
call peek64 ;Parent
ld e,a ;<< v0.04 >> Bug fix: compare A with parent, not 4!
ld a,(v_arg2)
cp e
jp z,branch
jp nbranch
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
call2n: ld a,2 ;CALL with 1 parameter, dump result
ld (v_argc),a
ld a,1
jp call_gen
;
call2s: ld a,2 ;CALL with 1 parameter, keep result
ld (v_argc),a
xor a
jp call_gen
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;Load and store operations
;
z_ldb: ld hl,(v_arg1)
ld bc,(v_arg2)
add hl,bc
call peek64
ld l,a
ld h,0
scf
jp ret_hl
;
z_ldw: ld hl,(v_arg1) ;Array
ld bc,(v_arg2) ;Offset
add hl,bc
add hl,bc
ld e,0
call ZXPKWI ;Read word into bc
ld h,b
ld l,c
scf
jp ret_hl
;
store: ld a,(v_arg1) ;Variable
ld hl,(v_arg2) ;Value
scf
jp put_var
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
z_scol: ld a,(v_arg1)
ld b,a
ld a,(v_arg2)
ld c,a
jp ZXSCOL ;SET colour
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
insobj: ld de,(v_arg1)
ld hl,(v_arg2)
ld a,d ;<< v1.01 avoid Object 0 errors
or e
scf
ret z
ld a,h
or l
scf
ret z ;>> v1.01
call obj_insert
scf
ret
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
throw: ld de,(v_arg2) ;Stack frame value
ld hl,(zstop)
and a
sbc hl,de ;HL -> new ZSP
ld (zsp),hl
ld hl,(v_arg1) ;Return value
jp z_ret
;